I made the choice of building a flat roof
with the use of tar and gravel. These materials were used separately and
alternatively by the roof contractor in order to make a strong base for roof.
Some of my friends recommended to use a flexible layer of rubber or fibreglass
on the surface of flat roofing to successfully and effectively protect it from
water and various weather elements. One problem with fibreglass covered roof is
that it does not have a single protective layer. In fact, many small pieces of
fibreglass are fused together for convenience and cost-efficiency. More
attention and care need to be taken in order to keep these pieces firmly
attached to one another and remain unaffected by bad weather condition or possible
traffic.
Another thing that was considered by my
builder is not to make the roof truly flat. He had left a slight slope or pitch
so that the rain water can get diverted to the ground or gutter. Pooling and
soaking of waste water were avoided to get rid of any future problems with the roofing.
Despite following all the instructions of
my building contractor, my flat roof did not last like any traditional sloped
or pitched roof. I had to look for efficient flat roof repair contractors after
ten years of making it. A thorough study on different coatings was done online
and their effectiveness is cross checked. It enabled me to find out a handful of
flat roof repair coatings that can restore the condition of your damaged
roofing no matter whether it is made of asphalt, metal, PVC, TPO or rubber.
Let’s get a quick idea about these coatings that are approved by most of the authorized
flat roof repair in Oklahoma City companies such as, http://www.masterroofingservices.com/,http://www.roofingoklahomacityoklahoma.com/,
www.eliteroofrepair.com .
Flat roof contractors no longer use the
traditional material, tar that produce toxic gas on getting heated. They focus
on to make water-resistant roofing with more flexible products that are readily
available in the market these days. PVC or rubber coatings together with gel
like substance appear among the list of recommended products that you may use. However,
you should choose the material for your flat roof repair only after reviewing
your existing roof condition and present coating of your roof. The selected
coating should suit the roof and get fixed to it properly.
Hypalon or Chlorosulfonated Polyethylene
It is mostly made of synthetic rubber and
can be heated and applied on joints in flat roof to make them look like one
sheet. Due to its liquid base, it can fasten the roof repair process.
EPDM
Apart from a single ply product, it happens
to be the most effective solution for flat roof repair. By applying a primer
and allowing it to settle over it for a considerable time, you will be able to
repair your damaged or leaky flat roofing very easily.
IB
Roofing Coating
It is a newly introduced PVC coating
product which is considered a better alternative than EPDM due to unique
formulation and better UV ray protection power.
Cold-liquid
coating
For the best protection from extreme cold
condition, you can depend on this type of coating. It goes well with almost all
types of roof structure.
No comments:
Post a Comment